|
Takstar MS-138 Conference microphone with base
|
NEW conference goose neck microphone |
|
|
|
|
|
Description :
PROFESSIONAL table conference microphone
- Back electret condenser cartridge
- Bright and clear sound
- Red LED to indicate speak state
- High sensitivity, low self-noise
- Wide range of the voltage use: battery or phantom power supply optional
- Flexible goosenecks altered smoothly and quietly to meet the special requirements of any situation
- ABS bases of the microphones
- Standard XLR balance output connector
- You must purchase the base and goose neck microphone together
Gooseneck length is 12 inch
Base is about 5 inch x 6 inch
Goose neck is detachable
What is included
gooseneck microphone, base, windscreen sponge , connection cable (XLR connection to base <-> 6.3mm jack connection to your sound system)
Details & Specs
ElementGBack Electrect Condenser
Polar Pattern: Uni-directional
Frequency Response: 50Hz-16kHz
Sensitivity: -38dB3dB (0dB=1V/Pa at 1kHz)
Output Impedance: 200[30% (at 1kHz)
Operating Voltage: 3V Battery ( 2 x AA battery, battery is not included ) or phantom power How to use:
- To use with battery: Install two 1.5V AA batteries into the battery box at the gooseneck base. If you use the phantom power from the mixer, you do not need to insert the batteries.
- Plug the XLR connector of the attached cable, connect the microphone to a sound device like mixer
- Turn the volume control down to zero, turn on the power on both the mixer and microphone, adjust the volume.
- The best distance between the microphone head and mouth shoudl be kept at 5 to 30 cm. | | | |
